Security - Kyocera FS-C5100DN Advanced Operation Manual

Security

ID
_
2-66
Security
The security functions can be set up to protect printer operation and the
print data.
The options available in Security are as follows:
• ID (Administrator ID input)
• Password (Administrator password input)
• I/F Block (Interface (external device) block setting)
• NetWare (NetWare setting)
• AppleTalk (AppleTalk setting)
• IPP (IPP setting)
• SSL Server (SSL Server setting)
• IPSec (IPSec setting)
• Security Level (Security Level setting)
1
Press [MENU].
2
Press or
>
ID (Administrator ID input)
To use the Security function, you must enter an administrator ID. For
information on how to set the administrator ID, refer to Admin
(Administrator settings) on page 2-81.
1
Press while Security > is displayed.
2
The message display shows ID and a blinking cursor (_).
3
Press or
blinking cursor. Enter the specified ID. Use
cursor right and left. Enter an ID consisting of between 1 and 16
numbers.
4
Press [OK]. Proceed to the next step Password (Administrator
Password input).
repeatedly until Security > appears.
to increase or decrease, respectively, the value at the
and to move the
Using the Operation Panel