Job Name; Don't Use Application Name; Overwrite Job Name; Selecting A Job Name - Kyocera FS-C5100DN User Manual

Job
4
5
6
7
8

Job Name

Don't Use Application Name

Overwrite Job Name

Selecting a Job Name

8-10
Press the up or down arrows until the desired User name appears on the
message display, then press the OK key.
Press the up or down arrows until the desired Job name appears on the
message display.
Press Delete.
If an access code was set, use the arrow keys and OK key to enter the 4-digit
access code, then press Enter.
Press Yes to delete the job.
A Job name is a unique identifier for each print job. It helps you find and print
your job from the printing system's operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name
to the job or use the name of the application file.
For Microsoft Word and PowerPoint, you can choose to include or omit the
application name from the application defined Job name. You can also ensure
that jobs in printing system memory are not replaced by new jobs having the
same Job name.
Don't use application name is an option to remove the application name from
the job name in the operation panel message and in job storage features. By
selecting Don't use application name, the file name you choose appears
clearly in the job list. This feature is applicable only when printing from Microsoft
Word or PowerPoint.
Overwrite job name is an option to ensure that a saved print job is not replaced
in printing system memory by a new job having the same Job name. If a user
sends two print jobs with the same User name and Job name, the second job
replaces the first job without any prompt. To prevent this, Overwrite job name
can automatically change the Job name by adding the date and time the job is
sent. This feature also helps you to track when print jobs were sent from the
computer.
The selected option applies to a Job name with either Application defined or
Custom selected. Overwrite job name options include:
Replace existing file
This option lets the current print job replace an existing job in printing system
memory, if a job with the same User name and Job name exists.
Use job name + date and time
This option adds the current date and time to the end of the Job name, in the
format: mmddyy hhmmss.
You must select a Job name to use with Job storage (e-MPS) features, so that
you can find your job in job lists on the printing system's operation panel. The
User Guide