Deleting A Prologue/Epilogue File; Assigning A Prologue/Epilogue File; Unassigning A Prologue/Epilogue File; Specifying The Insertion Point - Kyocera FS-C2026MFP User Manual

Advanced
2
3

Deleting a Prologue/Epilogue File

1
2

Assigning a Prologue/Epilogue File

1
2

Unassigning a Prologue/Epilogue File

1
2

Specifying the Insertion Point

9-2
After your text editor opens, make your changes to the file.
Save the file and exit.
Note: Editing and saving a command file replaces the contents of the existing
local or network file.
You can remove a Prologue/Epilogue file from the list.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list, and then click Delete.
In the delete confirmation box, click Yes to accept.
Note: Only the file name is removed from the command file list. The file itself
is not deleted, but remains on the network or local computer.
You can insert a Prologue/Epilogue file into a print job.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select a place to insert the Prologue/Epilogue file.
If you designate a Prologue/Epilogue file as unassigned, you are removing it
from the print job. It remains in the list. Unassigned selections are useful when
the list contains several Prologue/Epilogue files, and you want to use some but
not others.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select Unassigned.
The insertion point is the location in the print job where the selected
Prologue/Epilogue command file is processed by the printing system. Each file
in the list can be assigned only one insertion point.
Note: The Start of the page and End of the page insertion point options are
available only if PCL 5c is selected in the PDL Settings dialog box.
With a command file selected in the list, choose one insertion point option:
Unassigned
The selected command file is not inserted into the print job. This selection can
be used when you are working with multiple command files and want to use
User Guide