Kyocera FS-C1020MFP Safety Information Manual page 14

Others
Symbols
We declare under our sole responsibility that the product to which this declara-
tion relates is in conformity with the following specifications.
❖ NOTICE TO USERS (NEW ZEALAND)
• The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with minimum con-
ditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with
another item of Telepermitted equipment of a different make or model, nor
does it imply that any product is compatible with all of Telecom's network
services.
• This equipment is not capable, under all operating conditions, of correct
operation at the higher speeds for which it is designed. Telecom will accept
no responsibility should difficulties arise in such circumstances.
• This equipment shall not be set up to make automatic calls to the Telecom
"111" Emergency Service.
• If a charge for local calls is unacceptable, the "Dial" button should NOT be
used for local calls. Only the 7-digits of the local number should be dialled
from your telephone. DO NOT dial the area code digit or the "0" prefix.
• This equipment may not provide for the effective hand-over of a call to an-
other device connected to the same line.
• This device may be subject to ringing or bell tinkle when calls are made
from another device on the same line. If this occurs, the problem SHOULD
NOT be referred to the Telecom Faults Service.
A-14
DECLARATION OF CONFORMITY
2004/108/EC, 2006/95/EEC, 93/68/EEC and 1999/5/EC
TO
EN55024
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN60950-1
EN60825-1
TBR-21
EG201121 AN14R00