Table of Contents
Advertisement
Chapter 2
Button Functions
(Power) button function
Turn the printer on
Turn the printer off
Start up the printer in mass
storage mode
(Feed) button function
Feed the paper
Print the printer settings
(Bluetooth) button function
(RJ-4030 only)
Pair the printer to the computer
Use Bluetooth to communicate
when printing
End the Bluetooth connection
Start up the printer in mass
storage mode
Execute a file stored in the mass
storage area
24
Operation
While the printer is turned off, press and hold the
until the POWER indicator turns on.
While the printer is turned on, press and hold the
until the POWER indicator turns off. (If the [Auto Power Off] feature is
enabled in the RJ Utility, the printer will turn itself off automatically after
the selected period of inactivity.)
If you press and hold this button while also pressing the Wi-Fi
button/Bluetooth button, the printer starts up in mass storage mode
(see Mass Storage uu page 44).
Operation
When the paper type is set to [Die-cut Label] or [Media With Marks]:
Press the
(Feed) button to automatically feed the paper to the print
position.
When the paper type is set to [Continuous Length Tape]:
Press the
(Feed) button to feed the paper. The paper feeds a fixed
length; you can use a command to change this length.
Make sure that a roll is set, and then press and hold the
button. The printer starts printing its settings (see Printing the Printer
Set-up Information uu page 51).
Operation
When the printer and computer or other device haven't been paired
with each other via Bluetooth, hold this button (see Bluetooth
Connection (RJ-4030 Only) uu page 21).
When this key is pressed while the computer and the printer are not
connected via Bluetooth, the Bluetooth connection is established and
data can be transferred.
When the printer and computer are connected via Bluetooth, press this
button to end the connection.
If you press this button while pressing and holding the
button, the printer starts up in mass storage mode (see Mass Storage
uu page 44).
If you press this button while the printer is running in mass storage
mode, you can execute a command file stored in the mass storage
area (see Mass Storage uu page 44).
2
(Power) button
(Power) button
(Feed)
(Power)
Advertisement
Table of Contents
