Intel Desktop Board D945GCL Technical Product Specification
2.9.2
I/O Shield
The back panel I/O shield for the board must meet specific dimension and material
requirements. Systems based on this board need the back panel I/O shield to pass
certification testing. Figure 18 shows the I/O shield dimensions. Dimensions are
given in millimeters [inches]. The figures also indicate the position of each cutout.
Additional design considerations for I/O shields relative to chassis requirements are
described in the ATX specification.
NOTE
The I/O shield drawing is for reference only. I/O shields compliant with the ATX
chassis specification are available from Intel.
1.55 REF
[0.061]
22.45
[0.884]
7.01
[0.276]
1.00
[0.039]
A
0.00
[0.00]
11.81
[0.465]
12.04
[0.474]
58
162.3 REF
[6.390]
20 – 0.254 TYP
[0.787 – 0.10]
159.2 – 0.12
[6.268 – 0.005]
Figure 18. I/O Shield Dimensions
1.6 – 0.12
[0.063 – 0.005]
8x R 0.5 MIN
A
11.81
[0.465]
14.17
[0.558]
OM18508