1.9.2.1
RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 8).
Table 5 describes the LED states when the board is powered up and the
10/100 Mbits/sec LAN subsystem is operating.
Table 5. LAN Connector LED States
LED
LED Color
A
Green
B
Yellow
Figure 8. LAN Connector LED Locations
LED State
Condition
Off
LAN link is not established.
On
LAN link is established.
Blinking
LAN activity is occurring.
Off
10 Mbits/sec data rate is selected.
On
100 Mbits/sec data rate is selected.
Product Description
29