Hunter 28670 Owner's Manual page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
7-9. Thread the light and fan pull chains through the hole in the center
of the glass bowl. Then, thread the light pull chain through the hole
in the center of the cover plate.
7-10. Thread the fan pull chain through the grommet hole in the side of
the cover plate.
7-11. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-12. Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until tight.
7-13. Attach the extra pull chains (included) to the light and fan pull
chains using the breakaway connector. (You can find the
breakaway connector on the
end of the extra chain.)
Breakaway
Connector
14
42433-01 • 01/19/11 • Hunter Fan Company
Light Bulb
Sockets
(B10
Candelabra-
Based 60 Watt
Maximum)
Metal Disc
Metal Rod
Glass Bowl
Cover Plate
Finial