Eizo S2401W User Manual page 25

Problems
4. The screen is too bright or too
dark.
5. Afterimages appear.
6. The screen has defective
pixels (e.g. slightly light or
dark).
7. Fingerprints remain on the
screen.
8. The screen is flicking or the
position is not proper.
9. The Enter button does not
operate.
Points to check with Possible Solutions
Adjust the <Brightness> (p. 20) (The backlight
of the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please contact your dealer.)
Do you use the screen saver or timer when
displaying the same image for extended
periods of time?
Afterimages are particular to LCD monitors.
Avoid displaying the same image for extended
periods of time.
This is due to the characteristics of the panel
itself, and not the LCD product.
Leaving the screen white may solve the
problem.
Select the <Screen> in the ScreenManager
<Auto Adjustment> menu. (p. 18)
The adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while
pressing the Enter, switch the power on. (p. 17)
6. TROUBLESHOOTING
English
25