Using A Memory Card; Removing A Memory Card; Using An Express Card - Gateway P-6313h Reference Manual

Using a memory card

To access a file on a memory card:
1
2

Removing a memory card

memory card. If you use the remove hardware icon, your notebook may not
recognize your memory card reader until you restart your notebook.
To remove a memory card:
1
2

Using an Express Card

Your notebook has an Express Card slot. This slot accepts one
Type 54 Express Card. You do not need to restart your notebook
when changing most cards because your notebook supports
hot-swapping. Hot-swapping means that you can insert an
Express Card while your notebook is running. If your Express
Card does not work after hot-swapping, see the Express Card
manufacturer's documentation for further information.
To insert an Express Card:
•
www.gateway.com
Click (Start), then click Computer.
Double-click the drive letter (for example, the E: drive),
then double-click the file name.
Important
Do not use the remove hardware
Push the memory card into the notebook. The memory
card pops out slightly.
Pull the memory card out of the notebook.
Push the card firmly into the Express Card slot, label-side
up, until the outer edge of the card is flush with the side
of your notebook.
icon in the taskbar to remove the
59