Getting The Most From Your Battery; Maximizing Battery Performance; Conserving Battery Power - Gateway NX100X - Core Solo 1.06 GHz Reference Manual

Getting the most from your
battery

Maximizing battery performance

To get maximum performance from your notebook battery,
we recommend that you initially condition (fully charge and
discharge) your new battery a few times during the first
several weeks of use, to let it reach its maximum rated
capacity.
Over the long term, use the battery at least once a month,
even it was kept in a cool, dry place for storage, but avoid
frequent full discharges because this puts additional strain on
the battery. Several partial discharges with frequent
recharges are better for a lithium-ion battery than one
complete discharge, and recharging a partially charged
lithium-ion battery does not cause harm because there is no
memory.

Conserving battery power

To conserve power while using the battery to power your
notebook:
•
•
•
•
•
•
•
www.gateway.com
Turn off wireless networking and Bluetooth.
Dim the display as low as is comfortable.
Disconnect all external devices, like IEEE 1394 and USB
devices, and optical drives.
Remove PC Cards when you do not need them. Many
PC Cards use a small amount of power while inserted,
even if they are not being used.
Select the Power saver power plan to get maximum
power savings.
Tip
For more information about using power plans, see
notebook power settings" on page
Close the LCD panel to turn off the display while you
are not using your notebook. The display stays off until
you open the panel again.
Use Hibernate mode for maximum power savings while
your notebook is not in use.
54.
"Changing
51