Table of Contents
Advertisement
A
ssembly
attach oxypro
1. Locate the bag that contains OxyPro or
OxyPro Pet holster and can.
2. Attach holster to left side of vacuum (when
viewing from front) by lining up the two tabs
on the back side of the holster with the two
openings on the vacuum. Push holster down
to lock into place.
3. Place provided can of OxyPro/OxyPro Pet
into holster. Follow instructions on page 8
for OxyPro/OxyPro Pet application.
O
perations
power cord
to store power cord, wrap cord
around upper cord wrap and lower
extension wand support. use clip
on the end of the plug to attach
plug to the cord.
to release power cord, rotate the
upper cord wrap down and gently
pull off cord.
power switch
the power button is located just below
the handle on the right side of the vacu-
um when viewing from the front.
"on" (i) "off" (o)
note: Rotating brush will not turn on
unless the unit is in reclined position
and brush switch is on.
brush on/off switch
brush on/off is located just below the
handle on the right side of the vacuum
when viewing from the front. push the
rocker switch on- (i) to turn brush on
for most carpeted surfaces, when "on"
the brush will start rotating when unit is
in reclined position. push rocker switch
off – (o) to turn brush off for bare floor
cleaning or other delicate surfaces.
6
w w w . b i s s e l l . c o m
/oxypro
pet holster
®
®
Power Cord
Wrap
Power
Switch
attention:
Some Frieze carpets have long
delicate fibers or threads that
may be damaged by the rotat-
ing brush during vacuuming. It is
recommended the rotating brush
be turned OFF when cleaning this
type of carpet.
Brush
ON/Off
Switch
8 0 0 . 2 3 7 . 7 6 9 1
Advertisement
Table of Contents
