Brushroll; Hose; Powered Hand Tool - Hoover UH70140 Owner's Manual

brushroll

: how to clean
CAUTION
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
4.13 Turn vacuum over so bottom side is facing up.
Rotate red upper latch (A) counterclockwise.
4.14 Slide red lower latch (B) to the unlock position.
4.15 Pivot out bottom plate and remove any debris
and/or hair from brushroll.
4.16 Reposition bottom plate, aligning the three
tabs along front edge of nozzle guard with the
three slots in nozzle. Rotate back into position.
Slide red lower latch to Lock position, and rotate
red upper latch clockwise.

hose

: how to clean
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.17 To remove hose for tool use, press the hose release button (A) and pull
hose end out.
Clear away debris or obstructions from hose. Do not use sharp objects to clean
out hose as they can cause damage. To lock back into place, push hose into
hose tube until you hear a click.

powered hand tool:

(Tool varies per model)
CAUTION
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
4.18 Turn tool so bottom faces up. Rotate the
latches (A) on either side of tool.
4.19 Remove bottom plate (B).
4.20 Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front
edge of tool. Rotate latches back into locked
position.
!
CAUTION
!
how to clean
!
4.13
A
4.15
!
4.18
A
11
Actual model may vary from images shown.
4.14
b
4.16
4.17
A
4.19
b
4.20