Setting The Time Signature - Yamaha EZ-220 Owner's Manual

Setting the Time Signature

When this is set to a value other than 0, the first beat is accented with a bell sound. When set to 0, no beat is
accented. This instrument allows you to set the denominator of the time signature, as well as the beat (numerator
of the time signature).
1
Hold down the [METRONOME ON/OFF] button for longer than a
second.
The Beat (corresponding to the numerator of the Time Signature) is shown on
the display.
Hold for longer
than a second.
2
Use the number buttons to set the Beat over a range of 0 to 60.
3
Press the [FUNCTION] button.
The denominator of the Time Signature is shown on the display.
4
Use the [+] and [-] buttons to select a note.
The available values are as follows:
Value
02
04
08
16
Beat
TimeSigN
04
TimeSigD
04
Descriptions
Half note
Quarter note
8th note
16th note
Using the Metronome
NOTE
• The Time Signature settings
for a Song or Style will auto-
matically be changed when
you select a different Song
or Style.
EZ-220 Owner's Manual
33