Playing The Keyboard - Yamaha EZ-220 Owner's Manual

Quick Guide

Playing the Keyboard

The number designations q – @1 match those described in "Panel Controls and Termi-
nals" on page 8.
Turn the power on
] (Standby/On) switch q to turn on
Press the [
the power.
Adjust the volume
After the power is turned on, the default volume
level is shown at the left end in the display.
001
The more bars shown, the higher the volume level.
While checking this bar indication, use the [MAS-
TER VOLUME] buttons w to adjust the entire
volume of this instrument.
Press the [-] button
to lower the vol-
ume. Pressing this
twice will delete
one bar.
The default volume value is "12" (6 bars on the
display).
NOTE
• The Volume setting is reset to the default value whenever
the power is turned off.
12
EZ-220 Owner's Manual
GrandPno
−03
Press the [+] button
to increase the vol-
ume. Pressing this
twice will add one
bar.
Play the keyboard
After the power is turned on, playing the keyboard
will produce the Piano sound.
Select a Voice
Although the grand piano Voice is automatically
selected whenever the power is turned on, you can
easily change this to guitar, drums, or any of an
extensive range of Voices.
1
Press the [VOICE] !0 button.
2
Use the number buttons !1 to select a
Voice.
Example: Selecting Voice 012, Rock Organ.
012
Press number buttons [0], [1], [2].
Tips
Pressing the [PORTABLE GRAND] button @0
will reset the Voice setting to Grand Piano.
 Page 26
RockOrgn