Konica Minolta bizhub C220 User Manual page 54

2.10 User Box Function
8
Enter the new 8-digit User Box Password from the keyboard or keypad.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the screen shown in step 7.
9
Touch [OK].
% If the User Box Type is set to [Public], set a User Box Password that meets the requirements of the
Password Rules. For details of the Password Rules, see page 1-8.
% If there is a mismatch in the User Box Passwords, a message appears that tells that there is a mis-
match in the User Box Passwords. Enter the correct User Box Password.
10
Make the necessary settings.
% A User Box No. that already exists cannot be redundantly registered.
% If no User Box Name has been registered, [OK] cannot be touched. Be sure to register the User Box
Name.
11
Touch [OK].
bizhub C360/C280/C220
2
2-39