Konica Minolta bizhub C220 User Manual page 168

4.2 PageScope Box Operator
% If [ON (External Server)] (Active Directory) is set for the authentication method and if user authenti-
cation is successful, the User Name not registered in the machine is automatically registered.
% If the "Save logon user name" check box has been selected, the User Password entered is stored
in the PC being used. If you do not want the User Password stored, clear the "Save logon user
name" check box.
5
Click or double-click the desired User Box icon.
6
Type the 8-digit User Box Password.
7
Click [OK].
% If there is a mismatch in the User Box Password, a message appears that tells that authentication
has not been successful. Click [OK] and then enter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong User Box Password is counted
as unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) or more set by the Administrator of the machine, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, rejecting any more logon attempts. To cancel the ac-
cess lock state, the Administrator of the machine must perform the Release Setting. Contact the
Administrator of the machine.
% To delete a User Box, select the desired User Box icon, and select [Delete] from the [File] menu. A
confirmation message appears. Click [Yes] and enter the User Box Password corresponding to the
specific User Box. This deletes the User Box.
% If the "Save box password until disconnected" check box has been selected, the User Box Pass-
word entered is stored in the PC being used. If you do not want the User Box Password stored, clear
the "Save box password until disconnected" check box.
bizhub C360/C280/C220
4
4-21