Konica Minolta bizhub C220 User Manual page 273

13.3 Glossary
Term
[Duplex 2nd Side]
[Duplex/Combine]
[Edit Color]
[Finishing]
Finishing Preview
[Finishing Program]
[Glossy]
[Green]
Group (Access per-
mission)
Group (Copy or Fin-
ishing)
[Half-Fold]
[Hue]
[Manual]
[Minimal]
[Mirror Image]
[Mixed Original]
[Neg./Pos. Reverse]
[Offset]
[OHP Interleave]
[Original Direction]
[Original Type]
[Paper]
[Password Copy]
Proof Copy
[Punch]
[Red]
[Saturation]
[Save in User Box]
bizhub C360/C280/C220
Description
Function to use when copying on paper that has already been printed on one
side.
Function to specify the scanning side of the original and the printing side of the
paper to be 1-sided or 2-sided.
Function that configures the image according to the objectives of copy editing.
Allows you to select how to sort or finish copies when feeding them into the out-
put tray.
Function that allows you to check the finishing status with a preview image before
printing.
Allows you to select a preset offset or finishing method.
Function that improves the glossy level of an image.
Function that adjusts the level of green in the image, for example, if you wish to
emphasize the green of forests and trees.
Function that limits the addresses that can be accessed by each user in order to
assure security.
Function that prints copies in pages. This function first prints the specified
number of copies of the first page, and then prints the second page in the same
way.
Function that folds printed paper in half.
Function that adjusts the hue level to make the image either more reddish or more
bluish.
Function that enlarges or reduces the loaded original with the zoom ratio speci-
fied using the keypad, and copies it on paper.
This setting slightly reduces the image of the original and copies it at the center
of the paper.
Function that produces a copy in the mirror image of the original.
Function that detects the size of each original page and prints a copy on paper
of the appropriate size when loading originals in different page sizes into the Re-
verse Automatic Document Feeder.
Function that copies the original with the light- and dark-colored areas or the
colors (gradations) of the image reversed.
Function that sorts copies.
Function that inserts a blank sheet between transparency films each time a trans-
parency film is copied. This function prevents transparency films from sticking to-
gether.
Function that specifies the orientation of the original loaded into the ADF or
placed on the Original Glass.
Function that allows you to select the desired functions according to the original
text or image type and adjust it to obtain better image quality.
Allows you to configure the type and the size of the paper to be printed on.
To prevent unauthorized copying, this function prints a text such as Copy or Pri-
vate or information such as Date/Time on all pages of paper as a password when
copying. When a sheet of paper with a password embedded is copied, the cur-
rently running job is suspended, and the password entry screen is displayed. In
this case, enter the password to copy data.
Function that prints a sample copy and stops printing temporarily before printing
a large number of copies. This prevents copy errors from occurring in a large
number of copies.
Function that punches copies for filing.
Function that adjusts the level of red in the image, for example, if you wish to red-
den skin tones.
That adjusts the degree of vividness of the colors in the image.
Function that temporarily saves the job on the hard disk so that it can be recalled
later and used again.
13
13-8