Table of Contents
Advertisement
Intel Desktop Board D915GVWB Technical Product Specification
2.8 Connectors
CAUTION
Only the following connectors have overcurrent protection: back panel USB, front panel USB, and
PS/2.
The other internal connectors are not overcurrent protected and should connect only to devices
inside the computer's chassis, such as fans and internal peripherals. Do not use these connectors
to power devices external to the computer's chassis. A fault in the load presented by the external
devices could cause damage to the computer, the power cable, and the external devices themselves.
This section describes the board's connectors. The connectors can be divided into these groups:
•
Back panel I/O connectors
•
Component-side I/O connectors (see page 48)
2.8.1 Back Panel Connectors
Figure 15 shows the location of the back panel connectors. The back panel connectors are
color-coded. The figure legend (Table 16) lists the colors used (when applicable).
A
B
Table 16 lists the back panel connectors identified in Figure 15.
46
C
D
E
Figure 15. Back Panel Connectors
F
I
K
G
H
J
L
OM17314
Advertisement
Table of Contents
