Specifications - Eizo RadiForce GS520-BL User Manual

9. Specifications

. Specifications
LCD Panel
Viewing Angle
Dot Pitch
Horizontal Scan Frequency
Vertical Scan Frequency
Resolution
Max.Dot Clock
Gray Scale
Recommended Brightness
Display Area(H × V)
Power Supply
Power Consumption
Input Connector
Input Signal
Plug & Play
Environment
Conditions
USB
Classification of Equipment
Dimensions
Weight

GS520-BL 54cm(21.3 inch), TFT Monochrome LDC panel
Surface treatment: Anti-Glare Hard Coating
GS520-CL
Surface hardness: 2H
Response Time: 50ms
GS520-BLG 54cm(21.3 inch), TFT Monochrome LDC panel
Surface treatment: Hard Coating
GS520-CLG
Surface hardness: 3H
Response Time: 50ms
Horizontal:170°, Vertical: 170° (CR 10 or more)
0.165mm
31 ~ 135kHz
19 ~ 61Hz
(VGA TEXT : 69 ~ 71Hz / QSXGA : 19 ~ 51Hz)
5M pixels (Portrait: 2048 × 2560 dots (H × V))
300MHz
4096 steps of 13771 steps (12 bit monochrome signal input)
500 cd/m
422.4mm × 337.9mm (16.6"(H) x 13.3"(V))
100-120/200-240 VAC±10%, 50/60 Hz, 1.0-0.8A /0.5-0.4A
Max.:
Min.(Normal):
Power saving mode:
Main power off:
DVI-D x 1
TMDS(Single Link / Dual Link)
VESA DDC 2B / EDID structure 1.3
Temperature Operating: 0 °C ~ 35 °C (32 °F ~ 95 °F)
Storage: -20 °C ~ 60 °C (-4 °F ~ 140 °F)
Humidity Operating:30 % to 80 % R.H. Non-condensing
Storage: 30 % to 80 % R.H. Non-condensing
Pressure Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Standard USB Specification Revision 2.0
USB ports Upstream port × 1, Downstream port × 2
Communication 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Speed
Power Supply Downstream: 500 mA for each (Max.)
Type of protection against electric shock : Class I
EMC class : EN60601-1-2: 2001 Group 1 Class B
Classification of medical device (MDD 93/42/EEC) : Class I
With stand 388mm (W) ×512.5 ~ 594.5mm (H) ×208.5m (D)
(15.3"(W) x 20.2" ~ 23.4"(H) x 8.2"(D))
Without stand 388mm (W) ×480mm (H) ×88mm (D)
(15.3"(W) x 18.9" (H) x 3.46"(D))
With stand 9.6kg (21.2lbs.)
Without stand 6.6kg (14.6lbs.)
2
(approx.80%)
90W (With USB)
85W (Without USB)
Less than 1.2W
(for single signal input
0W
without USB)