Configuring The Smtp Settings - Sharp DX-C200P Software Manual

6. Monitoring and Configuring the Printer
Trap
Item
Target Trap
SNMP Management
Host 1
SNMP Management
Host 2
Community
Item
Get Community
Trap Community
System
Item
Location
Contact

Configuring the SMTP Settings

Click the [SMTP] tab on the network settings page to configure the SMTP settings.
92
Select whether to enable the printer to send traps to the management host
(NMS). When set to [Inactive], [SNMP Management Host 1] and [SNMP
Management Host 2] below become unavailable.
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Enter the community name to use for authentication of Get requests. Can
contain up to 32 characters.
Enter the community name to use for authentication of Trap requests. Can
contain up to 32 characters.
Enter the location of the printer. The location entered here is displayed on
the main page. Can contain up to 64 characters.
Enter the contact information of the printer. The contact information entered
here is displayed on the main page. Can contain up to 64 characters.
Description
Description
Description