Getting Started
Radio
This product may only be used on
specific radio frequencies, which vary
depending on the country of use. See
the product packaging or go to
www.garmin.com
the radio frequency of this product.
Muting the Radio
1. Select
.
2. Select Volume.
Choosing a Channel
Notice
The GPS performance may be affected
when transmitting on Norway channels
1, 3, 5, and 7.
1. Select Radio > Channel.
2. Use + or - to select a channel.
6
for details regarding
Scanning Channels
You can scan the channels for voice
activity.
Select Radio > Scan.
Setting Up a Scan List
You can pick which channels and codes
to scan. Selecting specific channels and
codes reduces the scan time and helps
prevent missing a transmission.
1. Select Radio >
Scanlist.
2. Select a channel to add.
3. Select
.
Monitoring for Activity
You can monitor a single channel for
any activity, including static and weak
voice signals. This is helpful if a signal
is going out of range.
Select Radio > Monitor.
Rino 650N Owner's Manual
> Setup