Epson WorkForce AL-MX200DNF User Manual page 283

DRPD Mode
*
Factory default menu setting
Auto Answer Fax
Purpose:
To specify a period of time for which the printer waits before entering the FAX Mode upon reception
of an incoming call. The interval can be specified within the range of 0 to 255 seconds. The default is 0
second.
Auto Ans. TEL/FAX
Purpose:
To specify a period of time for which the printer waits before entering the FAX Mode when the
external telephone receives an incoming call. The interval can be specified within the range of 0 to 255
seconds. The default is 6 seconds.
Auto Ans. Ans/FAX
Purpose:
To specify a period of time for which the printer waits before entering the FAX Mode when the
answering machine receives an incoming call. The interval can be specified within the range of 0 to 255
seconds. The default is 21 seconds.
Line Monitor
Purpose:
To specify the volume of the sound that the printer emits from the internal speaker while establishing a
connection for fax transmission.
Values:
Off
Min
*
Middle
Max
*
Factory default menu setting
To use this option, you need to subscribe the Distinctive Ring Pattern Detection
(DRPD) service from your telephone company that assigns multiple telephone
numbers to a single telephone line and distinguishes each line with a
distinctive ring pattern. Once this service is activated, then you can configure
your printer to monitor the line for the distinctive ring pattern.
Turns off the line monitor.
Sets the volume of the line monitor.
Using the Operator Panel Menus and Keypad
AL-MX200 Series User's Guide
283