Epson WorkForce AL-MX200DNF User Manual page 135

5. Slide the paper width guides inward until they rest lightly against the edges of the print media
stack.
6. Select the paper type on the print driver if the loaded print media is not plain paper. If a
user-specified print media is loaded in the PSI, you must specify the paper size on the print driver.
Note:
For details on specifying the paper size and type on the print driver, refer to the Help provided for the print
driver.
Loading Envelopes in the Priority Sheet Inserter (PSI)
Follow the guidelines below to load envelopes in the PSI.
Note:
❏ Be sure to insert envelopes all the way in. Otherwise, print media that is loaded in the paper tray will
be fed.
❏ When you print on envelopes, be sure to specify the envelope on the print driver. If not specified, the
print image will be rotated 180 degrees.
❏ If you do not load envelopes in the PSI right after they have been removed from the packaging, they
may bulge. To avoid jams, flatten them as shown below before loading them in the PSI.
AL-MX200 Series User's Guide
Printing Basics 135