Specifying The Queue - Epson WorkForce AL-MX200DNF User Manual

Installation starts. When the installation is complete, the window automatically closes.
For SUSE Linux Enterprise Desktop 11 (x86)
1. Double-click EPSON-AL_MX200-x.x-y.noarch.rpm on the Software Disc.
2. Click Install.
3. Enter the administrator's password, and then click Authenticate.
Installation starts. When the installation is complete, the window automatically closes.
For Ubuntu 10 (x86)
1. Double-click epson-al_mx200_x.x-y_all.deb on the Software Disc.
2. Click Install Package.
3. Enter the user password, and click OK.
4. Click Close.
5. Click the X button at the top-right of the dialog box to close the Package Installer dialog box.

Specifying the Queue

To perform printing, you must set up the print queue on your workstation.
Note:
When you have finished specifying the queue, you can then send print jobs from applications. Start a
print job from an application, and specify the queue in the print dialog box. Depending on the
application (Mozilla, for example), however, you may have to use the default queue for printing. In such
a case, you must specify a queue you want to use as the default queue. For details on specifying the default
queue, see "Specifying the Default Queue" on page 110.
For Red Hat Enterprise Linux 6 Desktop (x86)
1. Open the URL "http://localhost:631" using a web browser.
2. Click Administration.
AL-MX200 Series
Printer Connection and Software Installation
User's Guide
105