Gateway M-6873h Reference Manual page 46

You can use the EZ-Pad left and right buttons below the
touchpad to select objects.
to shut down the notebook to connect a USB mouse.
right-hand or left-hand configuration, and other touchpad settings, see
"Changing the mouse, touchpad, or pointing device settings" in your online User
Guide.
only accept clicking by using the touchpad buttons. You can change this feature
to allow tapping on the touchpad to simulate clicking the left button. For more
information, see "Changing the mouse, touchpad, or pointing device settings" in
your online User Guide.
To... Do this...
Move the
pointer on the
screen.
Select an
object on the
screen.
Start a
program or
open a file or
folder.
38
CHAPTER 3: Setting Up and Getting Started
Tip
You can attach a mouse to the notebook using a USB port. You do not need
Tip
For instructions on how to adjust the double-click speed, pointer speed,
Tip
You may have received your notebook with the EZ Pad touchpad set to
Move your finger
around on the
touchpad. If you
run out of space
and need to move
the pointer
farther, lift your
finger, move it to
the middle of the
touchpad, then
continue moving
your finger.
Position the
pointer over the
object. Quickly
press and release
the left button
once. This action
is called clicking.
Position the
pointer over the
object. Press the
left button twice
in rapid
succession. This
action is called
double-clicking.