Oki PACEMARK PM4410 Manual De L'utilisateur page 17

Groupe Option
Set-Up (suite) Default Path
Auto Path
Impact Mode
LF Speed
Width Control
Parallel I/F I-Prime
Pin 18
Auto Feed XT
[émulation Epson
seulement]
Bi-Direction
Serial I/F Parity
# Serial Bits
Protocol
Diagnostic Test
Busy Line
Baud Rate
DSR Signal
DTR Signal
Busy Time
Paramètres
Current Path, Rear Path, Front Path
Invalid, Valid
Normal, Quiet, Hi-Impact Copy
Fast, Slow
Invalid, Mode 1, Mode 2
Invalid, Buffer Print, Buffer Clear
+5V, Open
Valid, Invalid
Enable, Disable
None, Odd, Even
8 Bits, 7 Bits
Ready/Busy, X-ON/X-OFF
No, Yes
SSD-, SSD+, DTR, RTS
9600 BPS, 4800 BPS, 2400 BPS, 1200
BPS, 600 BPS, 300 BPS, 19200 BPS,
38400 BPS
Valid, Invalid
Rdy on Pwr Up, Ready on Select
200 ms, 1 sec
Panneau avant
17