Advertisement
b
Set the tone bars.
5-1
(Refer to the illustration of step 3-3 )
Raise the pedal until the knurled part is fully retracted, and fix the center rod by
tightening the center rod fixing bolt.
5-2
Engage the rail clamp on rail (2) and rail (3) with rail (1) and rail (4), respectively.
Rail Clamp
5-3
Hold the pedal depressed to keep the sustain damper lowered, and then carefully set
the tone bars.
Align each tone bar individually, and hook its string onto the corresponding post.
Confirm that all strings are secured to their posts, and then hook the two springs at the
low sound side into each other.
Low Sound Side
Springs
Rail (3)
Rail (1)
ASSEMBLY: YV-3910/3710/3700
Rail (4)
Rail Clamp
Rail (2)
High Sound Side
13
Advertisement
