Aux In Jack; Output Jacks (Line Out Jack/Headphone Jack) - Yamaha Silent Guitar SLG110S Owner's Manual

■. AUX.IN.jack
• The AUX IN jack can be used to connect an external stereo signal source to the Silent Guitar.
Connecting the audio output of a CD player, portable music player, etc., to the instrument allows you
to play along with the external audio source.
• The AUX IN jack's signal level can be controlled with the AUX IN level control.
■. Output.Jacks..(LINE.OUT.Jack/Headphone.Jack)
• The LINE OUT jack can be connected to an external input jack on a device such as a guitar amplifier,
powered speaker, mixing console, etc., using a separately purchased standard monaural phone cable.
This allows monitoring or recording of the Silent Guitar's sound via an external device.
Connecting the LINE OUT jack to the INPUT jack on an electronic tuner, allows tuning of the
instrument in the same manner as other electronic instruments.
• When using the supplied stereo earphones, insert the earphone plug into the headphones jack (PHONES)
and turn the headphone ON/OFF switch to its "ON" position.
• The LINE OUT jack is a monaural type jack while the headphones jack is stereo.
•. Before. connecting. the. Silent. Guitar. to. any. external. devices,. make. sure. that. the. power. of.
all.related.devices.is.turned.OFF..Set.the.volume.level.of.any.external.audio.sources.to.the.
minimum. level. before. connecting. anything.. High. volume. settings. could. cause. damage. to.
the.equipment.and.your.hearing.
•. Be. careful. not. to. step. on. the. cord..The. cord. may. break,. equipment. may. be. damaged,. and.
this.may.cause.a.substantial.shock.to.your.ears.
•. The.signal.from.the.Silent.Guitar's.output.jacks.must.NEVER.be.returned.to.the.AUX.IN.jack,.
either. directly. or. through. external. equipment.. Doing. so. will. result. in. feedback. which. may.
cause.damage.to.the.internal.electronics.
Connecting External Devices
11