Print Logs - Oki B4350n Technical Reference

Print Logs

The Server computer must be running continuously, or at least
be running at the scheduled time(s) each day, for the software to
acquire the print job information.
Setting Up/Changing the Log Acquisition Interval
The log acquisition interval is normally set up when you register a printer
(see "Registering Printers" on page 22).
To change the log acquisition interval for a particular registered printer
or group:
1. From the main Job Accounting window, click Printer to open the
printer tree, then click the printer for which you wish to change the
acquisition interval.
2. Click Printer
3. On the Options tab, make any desired changes under Acquire
Logs, then click OK.
Manually Setting Up Items Reported in the Log
To set up the items to be displayed in, or exported from, a log:
1. From the main Job Accounting window, click the printer/group for
which you wish to set up the log display.
2. Click Log
3. Click one of the following selections to set the items to be displayed
and the sequence in which they will be displayed:
Server Software
Note
→ Properties.
→
Display/Export Item Settings.
- 50 -