Tape Margin Function - Brother PT 2300 - P-Touch 2300 Thermal Transfer Printer User Manual

2 While still holding down c, continue pressing 6 until the desired frame setting is
displayed.

The Undl/Frm indicator comes on when any setting other than FRAME OFF is
selected.
3 Release c to apply the selected frame setting to the entire text.
EXAMPLE
To select the candy frame setting:
1
While holding down
and keep
2
While still holding down
6
ing
c
3
Release
The Tape margin function allows you to adjust the size of the margins on the left and right
sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL (1" (24 mm margins))
NONE (1/6" (4 mm margins))

When a setting other than FULL is selected, extra tape is fed out before printing starts.
The extra tape is cut off if the Auto cut function is set to ON, so that the left and right
margins are equal.
c
, press
c
held down.
c
until the candy frame is displayed.
.

TAPE MARGIN FUNCTION

6
once,
Caps
, continue press-
Caps
NARROW (1/3" (8 mm margins))
HALF (1/2" (12 mm margins))
Alt
Alt
51