Brother PT 2300 - P-Touch 2300 Thermal Transfer Printer User Manual page 47

7
Hold the end of the stamp stencil film in place
with your thumb, then pass the tape through the
guides while pulling it tight.
8
Fold the other end of the stamp stencil film over
the other side of the stamp film holder and hold it
in place with your finger.
9
Fit the stamp frame over the stamp stencil film and
push it into place.
0
Insert the stamp film holder straight into its cap.
 Be sure that the stamp is correctly covered in order
to prevent ink spills.
Guides
Fold over
43