Eizo ColorEdge CG221 User Manual page 24

(EX.4) Digital DVI-D
(EX.5) Digital DVI-D
D-Sub
(EX.6) Analog mini 15
pin
Selecting the Active Input
The Input Signal Selection switch on the control panel can be used to select either
SIGNAL 1 or SIGNAL 2 as the active input at any time. Every time the switch is
touched, the input changes. When switching the signal, the kind of the input signal
(Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the right top corner
of the screen.
Signal Cable (FD-
C39 enclosed)
Signal Cable (FD-
C39 enclosed)
Signal Cable (FD-
C16 enclosed)
Signal Cable FD-C16
enclosed)
Signal Cable (FD-
C16 enclosed)+
Adapter*
Signal Cable (FD-
C16 enclosed)
+Adapter*
*Macintosh Adapter (Optional)
D-Sub
mini 15 Analog
pin
D-Sub
Analog
15 pin
D-Sub
Analog
15 pin