Eizo ColorEdge CG221 User Manual page 13

(1) ScreenManager
(2) Mode Switch
(3) Auto Adjustment Switch
(4) Enter Switch
(5) Directing Switch (Left, Down, Up, Right)
(6) Input Signal Selection Switch
(7) Power Switch
(8) Indicator lamp
Custom
sRGB
EMU
Left Side
CAL
Cal. Alert
Adj. Lock
Signal 1
Right Side Signal 2
ON
Power Save Power saving
*1
The brightness of indicator lamps can be changed and turned off, when the
screen is displayed (Operation mode). See
The power status of the monitor when each lamp on
Indicator Lamp
ON
Light
Off
Off
* The unit is designed to be operated with your bare fingers. If you touch the
control panel with your gloved fingers or with something left on the control
panel, it may not work.
* If there are waterdrops or dew condensation on the control panel, or operating
with wet fingers, it may not work properly. In that case, be sure to dry or wipe it
up before use.
Rear
®
*1
Name The monitor status when each lamp on
Custom mode of
sRGB mode of
EMU mode of
CAL mode of
Notify that the monitor needs to be recalibrated in CAL
mode or EMU mode.
The monitor functions are locked.
Input signal from SIGNAL 1 is displayed.
Input signal from SIGNAL 2 is displayed.
Operation
Power Save
Off Operation
Light Power Saving
Off Power off
FineContrast Mode
FineContrast Mode
FineContrast Mode
FineContrast Mode
"Indicator setting".
Power status of the monitor