Samsung SCH-R270U User Manual page 46

For more information, refer to "Pause Dial from Contacts" on
page 23.
•
2-Sec Pause: Stops the calling sequence for two seconds, then sends
the remaining digits.
•
Wait: Stops the calling sequence until the phone receives further
input.
Note: You can enter multiple 2-Sec Pauses to extend the length of
a pause. For example, two consecutive 2-Sec Pauses cause
a total pause time of four seconds. Keep in mind that pauses
count as digits towards the 32-digit maximum.
To add pauses to a Contacts entry number, do the following:
Find the Contacts entry associated with the number you
1.
want to include one or more pauses. (For more
information, refer to "Finding a Contacts Entry" on
page 38.)
Select and edit the desired number. (For more information,
2.
refer to "Editing a Contacts Entry" on page 41.)
Press Options.
3.
Select a pause option to add to the number sequence.
4.
• 2-Sec Pause: A 2-second pause after which dialing resumes.
• Wait: A hard pause (waits for input).
42
Press to store the number to Contacts when you are
5.
finished entering information.
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
Find the Contacts entry you want to edit. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 38.)
Highlight the desired Contact, then press the Edit soft key.
2.
The Edit Contact screen displays on the screen.
Highlight the Ringtone field, then press the Set soft key.
3.
Highlight a Ringtone and press
4.
Press to save your changes.
5.
Deleting a Contacts Entry
Find the Contacts entry you want to delete. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 38.)
Highlight the desired entry, press the Options soft key, then
2.
select Erase. The phone prompts you to confirm the
erasure.
.