Samsung SCH-R270U User Manual page 29

Note: At each step, Voice Commands displays a list of available
commands.
If Voice Commands does not recognize your command, it
prompts for confirmation.
In standby mode, press and hold
Commands.
The following is a list of functions that you can perform
with Voice Commands:
• Call <Name or #>: Say the name or number of the person to call,
or say voicemail or last number.
• Send <MSG Type>: Select a message type: Text or Picture.
• Go To <Menu>: Say the application name or menu item to open.
• Check <Item>: View details about your phone's status.
• Contacts <Name>: Searches and displays a contact by name to
call. Ex: say "Contacts Aaron".
• Redial: Redials the last phone number called.
• Help: Displays helpful information about the Nuance Voice Service.
Call <Name or #>
Place a call by speaking a contact name or telephone number.
1.
2.
to launch Voice
3.
Send <MSG Type>
Create a new message by speaking the type of message and the
recipient(s).
1.
2.
In standby mode, press and hold
The audio prompt "Please say a command" sounds and the
Voice Commands display.
Say "Call", followed by:
• "< A Contact Name>", to call the default telephone number
• for a contact. Or, say "Call", followed by the type of number, Mobile,
Home, Work, or Pager.
• "<Telephone Number>" to dial phone number.
• "Voicemail" to access voicemail.
• "Last Number" to dial the number for the most recent call record.
Follow the prompts to confirm your selection and place the
call.
In standby mode, press and hold
The audio prompt "Please say a command" sounds and the
Voice Commands display.
Say "Send <Text, or Picture> Message to <contact name>".
.
.
Call Functions 25