Connecting via a local area network (LAN)
To connect via a LAN:
1.
Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to your LAN.
DVI
HDMI
.
Turn on your computer.
3.
Configure the necessary Internet connection settings.
• For more details, refer to the sections Configuring a dynamic IP/PPPoE network
connection or Configuring a static IP network connection.
• Contact your Internet Service Provider (ISP) for details or assistance in setting up your
Contact your Internet Service Provider (ISP) for details or assistance in setting up your
Internet connection.
44
DVI
HDMI
RJ-45 cable
Chapter 5: Connecting to the Internet
LAN