[Pict.adj.]; [Stabilizer] - Panasonic DMC LZ1 - Lumix Digital Camera Operating Instructions Manual

Press [ ] to display the [REC] mode menu and select the item to set.

[PICT.ADJ.]

Setting the picture quality for the
U
pictures taken
Set PICT. ADJ. depending on recording
situations and recording images.
CONTRAST Adjust the difference
between the brightness and
the darkness in the picture.
SHARPNESS The picture is sharply
(+) defi ned or softly (–)
focused.
SATURATION The colors in the picture
become vivid (+) or natural
(–).
NOISE The noise reduction effect
REDUCTION is adjusted.
• If the noise reduction effect is enhanced,
noise decreases, but picture resolution
may deteriorate slightly. To decrease
noise without enhancing the noise
reduction effect, lower the setting
for each items other than [NOISE
REDUCTION].
76
VQT1L86
Advanced-Shooting
[ STABILIZER]
This feature detects jitter and
corrects for it
MODE1
( )
MODE2
( )
OFF
( )
• The stabilizer function may not work in
the following cases so take special care
not to move the camera when pressing
the shutter button.
– When too much jitter occurs.
– When the zoom magnifi cation is high.
– In digital zoom range.
– When taking pictures while following
subjects in motion.
– When the shutter speed is extremely
slow due to dark conditions or other
reasons.
• In Intelligent auto mode [
selectable.
• It is fi xed to [MODE2] in [SELF PORTRAIT]
mode and [OFF] in [STARRY SKY] mode.
• In motion picture mode [i], [MODE2]
cannot be set.
( P19 )
The stabilizer operates
continuously and can assist
during photo composition.
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
When image stabilization is not
desired.
e.g. When using a tripod.
], [OFF] is not