Important Safety Instructions - ViewSonic CDE3201LED User Manual

Important Safety Instructions

Dangerous Voltage: The lightning flash with
arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the
presence of dangerous voltage within the
inside of the product that may be sufficient
level to constitute a risk of electric shock to
persons.
Instruction: The exclamation point within
an equilateral triangle is intended to alert the
user to the presence of important operating
and servicing instructions in the literature
accompanying the appliance.
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the equipment in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety
provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade and the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the outlet.
10. Prevent the power cord from being tread upon or pinched,
particularly at the plug, convenience receptacles, and the point
where they exit from the device. Be sure that the power outlet is
located near the equipment so that it is easily accessible.
11. Only use attachments/ accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/ apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus when it will be unused for a long period
of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, or the unit does not
operate normally, or has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC power cord from
being damaged. If the AC power cord is damaged, it may result
in a fire or an electric shock. Stop using it and ask your dealer or
ViewSonic service center to exchange it.
• Do not place the LCD display where the power cord is subject to
wear or abuse.
• Do not pinch, bend, or twist the cord excessively.
• The core lines may be bared and cut, causing a short-circuit, and
resulting in a fire or an electric shock.
• Do not convert or damage the power cord.
• Avoid power cord being rolled over or rested
upon.
• When the power cord is plugged in, do not
move the LCD display.
• Keep the power cord away from heat sources.
• When you disconnect the AC power cord, disconnect it from the
wall outlet first.
• When disconnecting the power cord, grasp the plug instead of
pulling the power cord.
• Use only an original ViewSonic AC power cord, not other
brands.
• Do not use the supplied AC power cord on any other equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose, do
not use it. Doing so may cause arcing and result in a
fire. Contact your electrician to change the outlet.
Wiring
For your safety, be sure to unplug the AC power
cord when connecting cables.
Take care not to trip on the cables. It may cause damage to the
LCD display set.
Electric shock
Do not touch the AC power cord or the LCD
display with a wet hand. If you plug/unplug the
AC power cord from the LCD display with a wet
hand, it may cause electric shock.
Lightning storms
During a lightning storm, unplug the LCD display from the wall
outlet and disconnect the antenna to prevent damage to the LCD
display.
When not in use
If you will not be using the LCD display set for long periods of
time, the LCD display set should be disconnected from the AC
power outlet to prevent power line surges. The LCD display set is
not disconnected from the AC power source when the LCD display
set is switched off.
To disconnect the LCD display set completely, unplug from the AC
power outlet.
Overloading
This LCD display set is designed to operate on a
120V AC supply only.
If there are too many appliances connected to the
same AC power outlet, it could result in a fire or
an electric shock.
iv