X10 SC1200 Owner's Manual page 6

Installation
First Menu Level
After pressing a menu up/down button and entering the PIN, the First level menu is
displayed, as shown below:
1. INSTALL
To select a menu option, press the up or down Menu button repeatedly to step through the
menu items 1 through 9 below (or you can press the number buttons 1 thru 9 on the control
panel (under the lid to the bottom right of the display) to go directly to that menu item.
Once you arrive at the menu item you desire, press OK to select it.
1. INSTALL Allows installation/removal of sensors, and/or remotes.
2. SET CLOCK Enter time followed by am or pm.
3. PHONE NUMS Store up to six (16 digit) phone numbers.
4. MESSAGE 1. RECORD (This is your own alarm message)
2. REPLAY (Replays your message).
5. NEW PIN Enter new 4 digit PIN.
6. MEMORY Clear all Sensors, Remotes, Timers, or Master Clear.
CLEAR
7. OPTIONS Set Chime On/Off, Siren On/Off, Set Housecode or Light Code.
8. DELAYS Set Exit, Entry, Dial, and Answer Delays.
9. SET TIMER Enter unit code, then On and Off time, then Daily, Once or Random.
To leave the fi rst level menu press the Clear button. If you are entering numbers (for
the time, etc.), Clear will clear all numbers entered. Otherwise Clear gives the option of
leaving the menu completely and going back to the HOME CONTROL mode, or staying in
the INSTALL mode.
Direct menu
access numbers
Menu buttons
OK button
10
Installation
Sub-menus
Once you've arrived at your desired fi rst level menu and pressed OK, you can select the
sub-menus under that menu item. Alternatively you can go directly to the sub-menu item
by pressing the appropriate number button.
Phone Numbers Sub-menu
Enter number up to 16 digits. Off/pm gives a pause.
PHONE 1
PHONE 2
PHONE 3
PHONE 4
PHONE 5
PHONE 6
Delays Sub-menu
All times are entered in seconds, up to 99.
ENTRY DELAY
EXIT DELAY
DIAL DELAY
ANSWER DELAY
Options Sub-menu
CHIME 1. CHIME ON
2. CHIME OFF (No chimes when doors/windows are opened)
SIREN 1. SIREN ON
2. SIREN OFF (Silent Alarm)
HOUSECODE Chosen by Menu up/down buttons
LIGHTCODE Chosen by Menu up/down buttons
Memory Clear Sub-menu
CLEAR ALL
SENSORS
CLEAR ALL
REMOTES
CLEAR ALL
TIMERS
MASTER
RESET
11