Delay Calibration; Time Delay Adjustment On Center Channel Speaker - Klipsch ProMedia DD-5.1 User Manual

DD-5.1 Operation – Time Delay Adjustment on Center Channel Speaker
balance
field
preset 1
save
SL/SR
DRC
Press the DELAY Button will display the current delay time for channel LS.
D o l b y
D E L A Y
Press the DELAY Button again will circle to next channel.
D o l b y
D E L A Y
Press the D TIME + or D TIME - button will increase or decrease the delay time for current
channel.
D o l b y
D E L A Y

Delay Calibration

Press DELAY Button to select the length of
delay prologic
delay time for SL/SR/C channels. Repeatedly
EQ on/off EQ setup
pressing DELAY Button will allow you to select
preset 2 preset 3
among 3 surround speakers (SL, SR, C.)
preset 4 load
The delay time range for SL/SR is 0 to 15 ms
Cen
and 0 to 5 ms for center.
SW
VOL D Time
Adjust delay time on selected channel by
pressing D TIME + or D TIME - on the remote
control.
D i g i t a I
D i g i t a I
D i g i t a I
S L 5 m s
S R 5 m s
S R 6 m s
20
C o
C o
C o