Dd-5.1 Remote Control - Klipsch ProMedia DD-5.1 User Manual

DD-5.1 Remote Control

9
2
mute
4
balance
7
field EQ
10
preset 1 preset 2
save preset 4
12
15
SL/SR
DRC
18
19
1 POWER Button
On/off key
2 INPUT MODE Button
Select among 5 different
source inputs
3 TEST Button
Test the signal for 6 discrete
channels
4 MUTE Button
. Interrupt the signal from
reaching the output
5 PROLOGIC Button
Select up to 4 different surround
settings
DD-5.1 Operation
6
power
1
3
delay prologic
5
on/off setup
EQ
8
preset 3
11
load
13
Cen
14
SW
VOL D Time
17
16
6 DELAY Button
Select the desired channel to engage the time
delay adjustment.
7 BALANCE Button
Custom set the volume setting for 6 channels
8 EQ SETUP Button
Select up to 5 EQ Band Settings
9 EQ ON/OFF Button
Activate the selected EQ Band Setting
10 FIELD Button
Select among 6 different sound fields
11 PRESET Button (P1, P2, P3, P4)
Store up to 4 different user settings
12 SAVE Button
Store user setting into a selected preset
13 LOAD Button
Activate user setting stored in selected preset
14 SPEAKER ON/OFF Buttons (CEN, SL/SR,
SW)
These 3 buttons switch the center speakers,
SL/SR speakers and subwoofer on and off.
CEN Buttons allows you to activate/deactivate
the center channel speaker.
LS/RS Button
activate/deactivate the left and right surround
speakers.
SW Button is used to activate/deactivate the
15 subwoofer.
BASS MANAGER Button
It switches among three bass configurations
16 (bass config. 1, bass config.2 and bass config.
3)
17 VOL + and VOL –
Increase/decrease the volume.
18 D TIME Button
Increase/decrease the delay time.
DRC Button
19 Select among 3 different compression ratios of
the dynamic range.
RESET Button
Press this button to reset the system to its
factory default settings.
12
lets you simultaneously