Net-Tune Server Settings - Integra NAC-2.3 Instruction Manual

Configuring Various Settings

Net-Tune Server Settings

If multiple Audio Network Servers exist on the
same LAN, you have to select the Audio Network
Server to which the NAC-2.3 is connected. (Be
sure to use the NAC-2.3 and the Audio Network
Server within the same network. If they reside on
different networks, the NAC-2.3 cannot
recognize the Net-Tune Audio Network Server.)
The NAC-2.3 searches for a server when it is
connected to the network for the first time, and
sets the preferred server parameter to the first
server found; however, you can change this
setting any time from the setup menu. Once you
have selected a server from the menu, that server
will be used as the preferred server; that is, the
NAC-2.3 will first attempt to access your selected
server next time it is connected to the network.
If there is no server accessible on the network, the
NAC-2.3 displays a "Server Timeout" message.
60
1. Make sure that the Audio Network
Server is running.
2. Make sure that the NAC-2.3 is
connected to the same network as the
server in the step 1 above is
connected to.
3. Choose your desired server.
Press the Setup button, select "Server" using
the Cursor / button, and press the Select
button.
You are presented with the "Select Server"
setup menu.
Press the Select button to list the names of
available servers.
Press the Cursor / button repeatedly to
select your desired server and then press the
Select button.