Presetting Internet Radio Stations - Integra NAC-2.3 Instruction Manual

Listening to Internet radio

Presetting Internet radio stations

The NAC-2.3 allows you to save your favorite
Internet radio station in the preset memory. Once
you have saved your favorite stations in the preset
memory, you can directly select one of the preset
stations using the Preset / button on the remote
controller. You can preset up to 20 stations.
Caution: Leaving the NAC-2.3 unpowered (.e.g.,
with the power cable disconnected) for 2 weeks or
longer may result in losing all the memory
contents including your preset stations and text
information. If this occurs, you will need to
preset your desired stations over again.
1. Tune to your desired station.
2. Press the Select button.
You are prompted to enter the station name.
If you don't need to enter the station name,
press the Setup button.
3. Press the Display button to select
which type of characters to enter.
Each time you press the Display button, the
character type cycles through uppercase
letters, lowercase letters, and numerals/
symbols.
Also, you can switch between the former and
latter halves of the character groups by
pressing the Cursor / button.
Tips:
Pressing the Select button after selecting
the display deletes the blinking character.
46
When using the remote controller, press the
Caps button to switch the character type.
4. Select your desired character by
pressing the Cursor
repeatedly.
To enter characters using the remote
controller:
Each time you press a numeric button on the
remote controller, the button cycles through a
number of assigned letters as shown in the
following example: A → B → C → A → . . .
You can press the numeric key "1" on the
remote controller to enter a symbol.
5. Press the Select button to enter the
selected character.
Repeat the step 4 and 5 until you enter all the
character for the station name. You can enter
up to 14 characters for a station name.
6. Press the Setup button.
An available preset number appears.
If all the preset numbers are already in use,
the NAC-2.3 displays preset number 1.
7. Select your desired preset number
and assign it to the station.
Press the Cursor / button to display your
desired preset number. To cancel the preset
operation, press the Setup button.
on
/ button