Configuration Guides, Command References, And Supplementary Resources - Cisco VGD-1T3 Software Configuration Manual

About Cisco IOS Software Documentation
Cisco IOS Supplementary Documents and Resources
Supplementary documents and resources are listed in

Configuration Guides, Command References, and Supplementary Resources

Table 1
including brief descriptions of the contents of the documents. The configuration guides and command
references listed support many different software releases and platforms. Your Cisco IOS software
release or platform may not support all these technologies.
For additional information about configuring and operating specific networking devices, go to the
Product Support area of Cisco.com at http://www.cisco.com/web/psa/products/index.html.
Table 2
command references. These supplementary resources include release notes and caveats; master
command lists; new, modified, removed, and replaced command lists; system messages; and the debug
command reference.
Table 1 Cisco IOS Configuration Guides and Command References
Configuration Guide and Command Reference Titles
Cisco IOS AppleTalk Configuration Guide
Cisco IOS AppleTalk Command Reference
Cisco IOS Asynchronous Transfer Mode
Configuration Guide
Cisco IOS Asynchronous Transfer Mode
Command Reference
Cisco IOS Bridging and IBM Networking
Configuration Guide
Cisco IOS Bridging Command Reference
Cisco IOS IBM Networking Command Reference
Cisco IOS Broadband and DSL Configuration Guide
Cisco IOS Broadband and DSL Command Reference
Cisco IOS Carrier Ethernet Configuration Guide
Cisco IOS Carrier Ethernet Command Reference
lists in alphabetical order Cisco IOS software configuration guides and command references,
lists documents and resources that supplement the Cisco IOS software configuration guides and
Table 2 on page
Features/Protocols/Technologies
AppleTalk protocol.
LAN ATM, multiprotocol over ATM (MPoA), and WAN ATM.
• Transparent and source-route transparent (SRT) bridging,
source-route bridging (SRB), Token Ring Inter-Switch Link
(TRISL), and token ring route switch module (TRRSM).
• Data-link switching plus (DLSw+), serial tunnel (STUN),
block serial tunnel (BSTUN); logical link control, type 2
(LLC2), synchronous data link control (SDLC); IBM
Network Media Translation, including Synchronous Data
Logical Link Control (SDLLC) and qualified LLC (QLLC);
downstream physical unit (DSPU), Systems Network
Architecture (SNA) service point, SNA frame relay access,
advanced peer-to-peer networking (APPN), native client
interface architecture (NCIA) client/server topologies, and
IBM Channel Attach.
Point-to-Point Protocol (PPP) over ATM (PPPoA) and PPP over
Ethernet (PPPoE).
Connectivity fault management (CFM), Ethernet Local
Management Interface (ELMI), IEEE 802.3ad link bundling,
Link Layer Discovery Protocol (LLDP), media endpoint
discovery (MED), and operations, administration, and
maintenance (OAM).
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Documentation Organization
13.
9