How To Replenish Saddle Stitcher Stapler - Kyocera KM-4230 Instruction Handbook Manual

Troubleshooting
7. Close the front lower cover.
8. Attach the saddle finisher to the machine body.
9. Then follow the instruction displayed on the front panel.
E. How to replenish saddle stitcher stapler
When a message of replenishing saddle stitcher stapler displays at
front panel, follow below procedure.
1. Open front lower cover.
2. Pull out the stitcher unit.
3. Pull the stitcher handle of the stitcher unit toward you, then lift it
open.
4. Remove the empty cartridge by holding right and left side.
- 12 -