When The Indicators Provide No Help; Problems Relating To Images - Epson Dreamino EMP-TW20 User Manual

Problem Solving

When the indicators provide no help

If any of the following problems occur and the indicators do not offer a solution, refer to the pages given
for each problem.

Problems relating to images

No images appear
Projection does not start, the projection area is
completely black, the projection area is completely blue,
etc.
The message "Not Supported." is displayed
p.35
The message "No Signal." is displayed
Images are fuzzy or out of focus
Interference or distortion appear in images
p.36
Problems such as interference, distortion or black &
white checked patterns appear.
Image is truncated (large) or small
Only part of the image is displayed.
Problems when projection starts
Power does not turn on
Problems relating to images
No images appear
Have you pressed the [Power]
button?
Are all of the indicators
switched off?
Is A/V Mute mode active?
Is a video signal being input?
Are the image signal format
settings correct?
34
See below
p.35
p.36
p.37
p.38
Press on the remote control or
panel.
Disconnect the power cable and then reconnect it.
Check the circuit breaker to see if power is being supplied.
Press on the remote control to cancel the A/V mute.
Check that the power for the connected equipment is turned on. If the
"Message" menu command has been set to "ON", messages relating
to the image signals will be displayed.
"Setting" - "Display" - "Message" p.30
If a composite video or S-Video signal is being input
If projection does not occur when the "Video Signal" menu
command is set to "Auto", select the signal format that matches the
signal source.
"Setting" - "Input Signal" - "Video Signal" p.30
Image colours are not right
The whole image appears purplish or
greenish, images are black & white, colours
appear dull, etc.
(Computer monitors and LCD screens have
different colour reproduction performance,
so that the colours projected by the projector
and the colours appearing on the monitor
may not necessarily match, but this is not a
sign of a problem.)
Images appear dark
Projection stops automatically
p.38
Other problems
No sound can be heard or the sound is faint
p.38
The remote control does not work
on the projector's control
p.37
p.38
p.39
p.14