Configuration Menu Functions - Epson Dreamino EMP-TW20 User Manual

Screen
p.27
Sleep Mode
Operation
p.28
User's Logo
p.29
Display
p.29
Input Signal
p.30
Volume
p.30
Language
p.30
Reset p.30
Lamp Hours
The message text will be displayed in yellow when it is
time to replace the lamp.
Time from 0H to 10H will be displayed as 0H.
From 10H onwards, the display will be in units of 1H.
Source
Input Signal
Resolution
Resolution
Video Signal
Refresh Rate
Sync Info
The "Info" menu is only used to display the projector status.
Position
Progressive
Aspect
Auto, Normal, Squeeze, Zoom
Zoom Caption
Output Scaling
Keystone
Projection
Setup Level
Direct Power ON
Sleep Mode
OFF , 5min. ,10min. , 30min.
Child Lock
High Altitude Mode
Menu Color
Message
Background Color
Startup Screen
Video Signal
Input A
Yes, No

Configuration Menu Functions

ON, OFF
Vertical Size
Zoom Position
This can only be set when component video
Normal, Larger
signals or RGB video signals are being input.
Front, Front/Ceiling
Rear, Rear/Ceiling
This can only be set when 525i or 525p
0% ,7.5%
component video signals are being input or when
NTSC signals from composite video or S-Video
are being input.
ON, OFF
ON, OFF
ON, OFF
Color 1, Color 2,
Black, Blue, Logo
Auto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, SECAM
Component, RGB-Video
Reset All
Memory Reset
Lamp - Hours Reset
Only displayed for composite video/S-Video input
Only displayed for component video/RGB-video/Computer input
Only displayed for RGB-video/Computer input
ON, OFF
ON, OFF
p.31 Yes, No
Yes, No
p.31
p.31 Yes, No
25