Konica Minolta bizhub 552 User Manual page 42

2.8 User Setting Function
% To change a User Password, perform steps 6 through 8.
6
Touch [Password].
7
From the keyboard or keypad, enter a new User Password that may consist of 8 or more digits.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the screen shown in step 6.
8
Touch [OK].
% If the entered User Password does not meet the requirements of the Password Rules, a message
that tells that the entered User Password cannot be used appears. Enter the correct User Password.
For details of the Password Rules, see page 1-8.
% If the entered User Password does not match, a message that tells that the User Password does
not match appears. Enter the correct User Password.
bizhub 652/552
2
2-27