Table of Contents
Advertisement
Intel Desktop Board D845GVSR Technical Product Specification
1.13.2.1
Power Connector
ATX12V-, SFX12V-, and TFX12V-compliant power supplies can turn off the system power
through system control. When an ACPI-enabled system receives the correct command, the power
supply removes all non-standby voltages.
When resuming from an AC power failure, the computer returns to the power state it was in before
power was interrupted (on or off). The computer's response can be set using the Last Power State
feature in the BIOS Setup program's Boot menu.
For information about
The location of the power connector
The signal names of the power connector
The BIOS Setup program's Boot menu
The ATX, SFX, and TFX12V specifications
1.13.2.2
Fan Connectors
Table 14 summarizes the function/operation of the fan connectors.
Table 14.
Fan Connector Function/Operation
Connector
Processor fan
Front chassis fan
Rear chassis fan
38
Description
• +12 V DC connection for a processor fan or active fan heatsink.
• Fan is on in the S0 or S1 state.
Fan is off when the system is off or in the S3, S4, or S5 state.
• Option to wire the fan tachometer input to the I/O controller or the Hardware
Monitoring and Fan Control ASIC.
• +12 V DC connection for a system or chassis fan.
• Fan is on in the S0 or S1 state.
Fan is off when the system is off or in the S3, S4, or S5 state.
• Option to wire the fan tachometer input to the Hardware Monitoring and Fan
Control ASIC.
• +12 V DC connection for a system or chassis fan.
• Fan is on in the S0 or S1 state.
Fan is off when the system is off or in the S3, S4, or S5 state.
• Option to wire the fan tachometer input to the I/O controller or the Hardware
Monitoring and Fan Control ASIC.
Refer to
Figure 5, page 50
Table 27, page 52
Table 64, page 96
Section 1.5, page 17
Advertisement
Table of Contents
